Accidently shut down the website to my g1 mini while flashing

[amunoz]

i was downloading the latest software update i downloaded it successfully but than it wouldnt connect to my pool and so i tried to downgrade it but while i was downgrading to the old version my computer froze and shut down my web browser. now the fans just kick on for a second and than shut off and it just keeps doing that… i cannot log into the miner … is there a way i can connect the miner directly to my laptop

[noobvie]

No worry, use microsdcard to flash your firmware, it should be fine.

[Help] How to unbrick miner ipollo g1 mini

Hi Guys, I finally able to recover my g1 mini to original firmware. The reason was from the way I created the bootable microsdcard is not correct. My card was not fully formatted before running that tool. Basically, after we run win32diskimager, there should be 3 partitions like this in same card [image] When it’s done, we just insert in tfcard hole then turn on the miner, both led will blink then the miner comes back to original state. One more thing, every changes in the miner will be on…

[amunoz]

do i download the win32diskimager to the sd? im confused

[noobvie]

you need to download win32diskimager then run it with the firmware image.
just spend some times and play around, it won’t be bricked.