# Grin Node on Raspberry Pi

**URL:** <https://forum.grin.mw/t/grin-node-on-raspberry-pi/3969>\
**Category:** Development and Technical Discussion\
**Created:** [February 11, 2019, 3:43pm UTC](https://forum.grin.mw/t/grin-node-on-raspberry-pi/3969 "2019-02-11T15:43:55Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Grin1](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.grin.mw/grin1/32/1901_2.png) [@Grin1](https://forum.grin.mw/u/Grin1)\
**Post date:** [February 11, 2019, 4:32pm UTC](https://forum.grin.mw/t/grin-node-on-raspberry-pi/3969/2 "2019-02-11T16:32:38Z")

</div>

> [@"Grin Pie" - build fails when compiling \`grin\_store\`](https://forum.grin.mw/t/grin-pie-build-fails-when-compiling-grin-store/3764):
>
> I ran into trouble compiling Grin node on a Raspberry Pi 3 B+. (64 arm architecture + 64 gig SD card) The build fails when compiling grin\_store I read to limit your state storage to 2^32 bytes, but not sure how to do that?

We started the topic ‘Grin Pie’ and a few of us are working on it and sharing even though others think we are misguided, we could use your feedback. It would be for the newest Raspberry Pi 3+ models.

---

_[View the full topic](https://forum.grin.mw/t/grin-node-on-raspberry-pi/3969)._