# Grin Miner got stuck while wallet is working fine

**URL:** <https://forum.grin.mw/t/grin-miner-got-stuck-while-wallet-is-working-fine/1387>\
**Category:** Mining\
**Created:** [December 10, 2018, 5:46pm UTC](https://forum.grin.mw/t/grin-miner-got-stuck-while-wallet-is-working-fine/1387 "2018-12-10T17:46:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chainmaster](https://avatars.discourse-cdn.com/v4/letter/c/838e76/32.png) [@chainmaster](https://forum.grin.mw/u/chainmaster)\
**Post date:** [December 10, 2018, 5:46pm UTC](https://forum.grin.mw/t/grin-miner-got-stuck-while-wallet-is-working-fine/1387/1 "2018-12-10T17:46:36Z")

</div>

OS: Macos mojave 10.14.1  
PC: iMac pro with 1 processor and 14 cores  
Graphics: Radeon pro Vega 64 with 16GB of HBM2 memory  
Grin&Grin miner version: 0.4.2  
Config changed in grin-miner.toml:  
nthreads = 12  
cpuload = 1

Hello guys, I just set up Grin Miner today, and got some grin coin mined, but I found the Grin miner got stuck and 100 block height behind the active block height, anyone have the same issue, how did you fixed it?

---

<div class="post-metadata">

**Author:** ![chainmaster](https://avatars.discourse-cdn.com/v4/letter/c/838e76/32.png) [@chainmaster](https://forum.grin.mw/u/chainmaster)\
**Post date:** [December 11, 2018, 8:08am UTC](https://forum.grin.mw/t/grin-miner-got-stuck-while-wallet-is-working-fine/1387/4 "2018-12-11T08:08:30Z")

</div>

After delete & rebuild grin-miner without modify grin-miner.toml, it worked and caught up with the active block for a while, but it’s leg behind the active block half an hour later.

And got stuck a whole night.

I didn’t see any errors when monitor the grin-miner.log.
