# Grin 1.0.1 Connected peers 0 **URL:** \ **Category:** Tech Support\ **Created:** [February 19, 2019, 8:43am UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147 "2019-02-19T08:43:35Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![papampi](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.grin.mw/papampi/32/1695_2.png) [@papampi](https://forum.grin.mw/u/papampi)\ **Post date:** [February 19, 2019, 8:43am UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/1 "2019-02-19T08:43:35Z")
Cant connect to peers here is my log: ``` 20190219 12:08:45.494 INFO grin - This is Grin version 1.0.1 (git v1.0.1), built for x86_64-unknown-linux-gnu by rustc 1.32.0 (9fda7c223 2019-01-16). 20190219 12:08:45.494 DEBUG grin - Built with profile "release", features "". 20190219 12:08:45.494 WARN grin::cmd::server - Starting GRIN in UI mode... 20190219 12:08:45.494 INFO grin_servers::grin::server - Starting server, genesis block: 40adad0aec27 20190219 12:08:45.763 DEBUG grin_store::prune_list - prune_list: bitmap 50997 pos (81748 bytes), pruned_cache 544287 pos (82008 bytes), shift_cache 50997, leaf_shift_cache 50997 20190219 12:08:46.019 DEBUG grin_store::prune_list - prune_list: bitmap 50997 pos (81748 bytes), pruned_cache 544287 pos (82008 bytes), shift_cache 50997, leaf_shift_cache 50997 20190219 12:08:46.019 TRACE grin_chain::txhashset::txhashset - Starting new txhashset header extension. 20190219 12:08:46.019 TRACE grin_chain::txhashset::txhashset - Committing txhashset header extension. size 83761 20190219 12:08:46.024 TRACE grin_chain::txhashset::txhashset - TxHashSet header extension done. 20190219 12:08:46.024 TRACE grin_chain::txhashset::txhashset - Starting new txhashset extension. 20190219 12:08:46.024 DEBUG grin_chain::txhashset::txhashset - Rewind to header 000002bcab54 at 41884 20190219 12:08:46.024 DEBUG grin_chain::txhashset::txhashset - txhashset: rewind_to_pos: header 83761, output 839105, kernel 310812 20190219 12:08:46.025 DEBUG grin_chain::chain - init: rewinding and validating before we start... 000002bcab54 at 41884 20190219 12:08:46.025 TRACE grin_chain::txhashset::txhashset - Committing txhashset extension. sizes (83761, 839105, 839105, 310812) 20190219 12:08:46.041 TRACE grin_chain::txhashset::txhashset - TxHashSet extension done. 20190219 12:08:46.044 DEBUG grin_chain::chain - init: head: 70187432611791 @ 41884 [000002bcab54] 20190219 12:08:46.044 DEBUG grin_chain::chain - init: header_head: 70187432611791 @ 41884 [000002bcab54] 20190219 12:08:46.044 DEBUG grin_chain::chain - init: sync_head: 70187432611791 @ 41884 [000002bcab54] 20190219 12:08:46.044 DEBUG grin_chain::chain - Starting txhashset compaction... 20190219 12:08:47.151 DEBUG grin_chain::chain - ... finished txhashset compaction. 20190219 12:08:47.151 DEBUG grin_chain::chain - compact_blocks_db: head height: 41884, tail height: 31804, horizon: 10080, cutoff: 31804 20190219 12:08:47.161 DEBUG grin_chain::chain - compact_blocks_db: removed 0 blocks. tail height: 31804 20190219 12:08:47.162 DEBUG grin_servers::common::types - sync_state: sync_status: Initial -> AwaitingPeers(true) 20190219 12:08:47.162 INFO grin_servers::grin::server - Starting rest apis at: 127.0.0.1:3413 20190219 12:08:47.162 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns mainnet.seed.grin-tech.org 20190219 12:08:47.162 INFO grin_api::handlers - Starting HTTP API server at 127.0.0.1:3413. 20190219 12:08:47.162 INFO grin_servers::grin::server - Starting dandelion monitor: 127.0.0.1:3413 20190219 12:08:47.162 DEBUG grin_servers::grin::dandelion_monitor - Started Dandelion transaction monitor. 20190219 12:08:47.162 WARN grin_servers::grin::server - Grin server started. 20190219 12:08:48.519 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns mainnet.seed.grin.icu 20190219 12:08:48.718 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns mainnet.seed.713.mw 20190219 12:08:49.128 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns mainnet.seed.grin.lesceller.com 20190219 12:08:49.333 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns mainnet.seed.grin.prokapi.com 20190219 12:08:49.539 DEBUG grin_servers::grin::seed - Retrieving seed nodes from dns grinseed.yeastplume.org 20190219 12:08:49.747 DEBUG grin_servers::grin::seed - Retrieved seed addresses: [V4(46.4.91.48:3414), V4(95.216.163.175:3414), V4(145.239.4.27:3414), V4(157.230.48.217:3414), V4(198.245.50.26:3414), V4(5.9.152.75:3414), V4(35.247.33.125:3414), V4(45.118.135.254:3414), V4(139.162.168.18:3414), V4(173.230.154.243:3414), V4(35.226.50.239:3414), V4(37.187.124.202:3414), V4(34.207.234.131:3414), V4(35.181.9.140:3414), V4(35.197.27.243:3414), V4(195.201.38.140:3414), V4(109.74.202.16:3414)] 20190219 12:08:49.747 TRACE grin_servers::grin::seed - No preferred peers 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 46.4.91.48:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 157.230.48.217:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 95.216.163.175:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 198.245.50.26:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 5.9.152.75:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 35.247.33.125:3414 20190219 12:08:49.747 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 145.239.4.27:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 139.162.168.18:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 45.118.135.254:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 173.230.154.243:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 35.226.50.239:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 34.207.234.131:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 37.187.124.202:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 35.181.9.140:3414 20190219 12:08:49.748 DEBUG grin_servers::grin::seed - monitor_peers: on 0.0.0.0:3414, 0 connected (0 most_work). all 0 = 0 healthy + 0 banned + 0 defunct 20190219 12:08:49.748 DEBUG grin_servers::grin::seed - monitor_peers: no preferred peers 20190219 12:08:49.748 DEBUG grin_servers::grin::seed - monitor_peers: no dandelion relay updating 20190219 12:08:49.748 DEBUG grin_p2p::peers - Could not update dandelion relay 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 195.201.38.140:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 109.74.202.16:3414 20190219 12:08:49.748 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. connecting to 35.197.27.243:3414 20190219 12:08:49.948 DEBUG grin_p2p::peer - connect: handshaking with Ok(V4(5.9.152.75:3414)) 20190219 12:08:49.948 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 95.216.163.175:3414: Os { code: 111, kind: ConnectionRefused, message: "Connection refused" } 20190219 12:08:49.948 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 195.201.38.140:3414: Os { code: 111, kind: ConnectionRefused, message: "Connection refused" } 20190219 12:08:49.948 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 37.187.124.202:3414: Os { code: 111, kind: ConnectionRefused, message: "Connection refused" } 20190219 12:08:49.950 DEBUG grin_p2p::peer - connect: handshaking with Ok(V4(157.230.48.217:3414)) 20190219 12:08:49.951 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 198.245.50.26:3414: Os { code: 111, kind: ConnectionRefused, message: "Connection refused" } 20190219 12:08:49.969 DEBUG grin_p2p::peer - connect: handshaking with Ok(V4(34.207.234.131:3414)) 20190219 12:08:51.748 DEBUG grin_servers::grin::seed - monitor_peers: on 0.0.0.0:3414, 0 connected (0 most_work). all 0 = 0 healthy + 0 banned + 0 defunct 20190219 12:08:51.748 DEBUG grin_servers::grin::seed - monitor_peers: no preferred peers 20190219 12:08:51.748 DEBUG grin_servers::grin::seed - monitor_peers: no dandelion relay updating 20190219 12:08:51.748 DEBUG grin_p2p::peers - Could not update dandelion relay 20190219 12:08:55.749 DEBUG grin_servers::grin::seed - monitor_peers: on 0.0.0.0:3414, 0 connected (0 most_work). all 0 = 0 healthy + 0 banned + 0 defunct 20190219 12:08:55.749 DEBUG grin_servers::grin::seed - monitor_peers: no preferred peers 20190219 12:08:55.749 DEBUG grin_servers::grin::seed - monitor_peers: no dandelion relay updating 20190219 12:08:55.749 DEBUG grin_p2p::peers - Could not update dandelion relay 20190219 12:08:59.749 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 139.162.168.18:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.749 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 145.239.4.27:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.749 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 46.4.91.48:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.749 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 35.181.9.140:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.750 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 35.226.50.239:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.755 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 35.247.33.125:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.755 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 45.118.135.254:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.755 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 109.74.202.16:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.755 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 173.230.154.243:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:08:59.756 TRACE grin_p2p::serv - connect_peer: on 0.0.0.0:3414. Could not connect to 35.197.27.243:3414: Custom { kind: TimedOut, error: StringError("connection timed out") } 20190219 12:09:03.750 DEBUG grin_servers::grin::seed - monitor_peers: on 0.0.0.0:3414, 0 connected (0 most_work). all 0 = 0 healthy + 0 banned + 0 defunct 20190219 12:09:03.750 DEBUG grin_servers::grin::seed - monitor_peers: no preferred peers 20190219 12:09:03.751 DEBUG grin_servers::grin::seed - monitor_peers: no dandelion relay updating 20190219 12:09:03.751 DEBUG grin_p2p::peers - Could not update dandelion relay 20190219 12:09:19.754 DEBUG grin_servers::grin::seed - monitor_peers: on 0.0.0.0:3414, 0 connected (0 most_work). all 0 = 0 healthy + 0 banned + 0 defunct 20190219 12:09:19.754 DEBUG grin_servers::grin::seed - monitor_peers: no preferred peers 20190219 12:09:19.754 DEBUG grin_servers::grin::seed - monitor_peers: no dandelion relay updating 20190219 12:09:19.754 DEBUG grin_p2p::peers - Could not update dandelion relay ``` How to solve it? ---
**Author:** ![papampi](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.grin.mw/papampi/32/1695_2.png) [@papampi](https://forum.grin.mw/u/papampi)\ **Post date:** [February 19, 2019, 8:55am UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/2 "2019-02-19T08:55:42Z")
There was a network issue … solved ---
**Author:** ![colin](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@colin](https://forum.grin.mw/u/colin)\ **Post date:** [February 21, 2019, 4:56am UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/3 "2019-02-21T04:56:38Z")
Hello, not sure why my grin-server cannot connect to any peers. It was working fine a few days ago; now nothing. Tried updating to v1.0.1 and bminer v15 but no change. When I run the `grin` command, the server program loads, but does nothing. I deleted the chain\_data folder because someone suggested that to restart the sync, but that didn’t work either. I’m on ubuntu server 18.04. i don’t remember having to forward any ports for the `grin` program like i had to for `grin wallet -e listen`. Should i port forward the `3414` in the server P2p configuration in `grin-server.toml`? ```auto 20190221 04:49:00.439 INFO grin_util::logger - log4rs is initialized, file level: Info, stdout level: Warn, min. level: Info 20190221 04:49:00.439 INFO grin - Using configuration file at /home/asus/.grin/main/grin-server.toml 20190221 04:49:00.439 INFO grin - This is Grin version 1.0.1 (git v1.0.1), built for x86_64-unknown-linux-gnu by rustc 1.32.0 (9fda7c223 2019-01-16). 20190221 04:49:00.439 WARN grin::cmd::server - Starting GRIN in UI mode... 20190221 04:49:00.439 INFO grin_servers::grin::server - Starting server, genesis block: 40adad0aec27 20190221 04:49:00.512 INFO grin_servers::grin::server - Starting rest apis at: 127.0.0.1:3413 20190221 04:49:00.513 INFO grin_api::handlers - Starting HTTP API server at 127.0.0.1:3413. 20190221 04:49:00.513 INFO grin_servers::grin::server - Starting dandelion monitor: 127.0.0.1:3413 20190221 04:49:00.513 WARN grin_servers::grin::server - Grin server started. 20190221 04:49:00.514 INFO grin_servers::mining::stratumserver - (Server ID: 0) Starting stratum server with edge_bits = 31, proof_size = 42 20190221 04:49:00.514 WARN grin_servers::mining::stratumserver - Stratum server started on 127.0.0.1:3416 ``` ![41](https://canada1.discourse-cdn.com/flex036/uploads/grin/original/2X/0/0f4e674d82c9355b36afa27f74067ac0f66002d7.png) ```auto # Generated Server Configuration File for Grin # # When running the grin executable without specifying any command line # arguments, it will look for this file in two places, in the following # order: # # -The working directory # -[user home]/.grin # ######################################### ### SERVER CONFIGURATION ### ######################################### #Server connection details [server] #the directory, relative to current, in which the grin blockchain #is stored db_root = "/home/asus/.grin/main/chain_data" #path of TLS certificate file, self-signed certificates are not supported #tls_certificate_file = "" #private key for the TLS certificate #tls_certificate_key = "" #the address on which services will listen, e.g. Transaction Pool api_http_addr = "127.0.0.1:3413" #path of the secret token used by the API to authenticate the calls #comment it to disable basic auth api_secret_path = "/home/asus/.grin/main/.api_secret" #The chain type, which defines the genesis block and the set of cuckoo #parameters used for mining as well as wallet output coinbase maturity. Can be: #AutomatedTesting - For CI builds and instant blockchain creation #UserTesting - For regular user testing (cuckoo 16) #Floonet - For the long term floonet test network #Mainnet - For mainnet chain_type = "Mainnet" #the chain validation mode, defines how often (if at all) we #want to run a full chain validation. Can be: #"EveryBlock" - run full chain validation when processing each block (except during sync) #"Disabled" - disable full chain validation (just run regular block validation) chain_validation_mode = "Disabled" #run the node in "full archive" mode (default is fast-sync, pruned node) archive_mode = false #skip waiting for sync on startup, (optional param, mostly for testing) skip_sync_wait = false #whether to run the ncurses TUI. Ncurses must be installed and this #will also disable logging to stdout run_tui = true #Whether to run a test miner. This is only for developer testing (chaintype #usertesting) at cuckoo 16, and will only mine into the default wallet port. #real mining should use the standalone grin-miner run_test_miner = false #test miner wallet URL (burns if this doesn't exist) #test_miner_wallet_url = "http://127.0.0.1:3415" ######################################### ### SERVER P2P CONFIGURATION ### ######################################### #The P2P server details (i.e. the server that communicates with other [server.p2p_config] #The interface on which to listen. #0.0.0.0 will listen on all interfaces, allowing others to interact #127.0.0.1 will listen on the local machine only host = "0.0.0.0" #The port on which to listen. port = 3414 #how to seed this server, can be None, List or DNSSeed seeding_type = "DNSSeed" #If the seeding type is List, the list of peers to connect to can #be specified as follows: #seeds = ["192.168.0.1:3414","192.168.0.2:3414"] #hardcoded peer lists for allow/deny #will *only* connect to peers in allow list #peers_allow = ["192.168.0.1:3414", "192.168.0.2:3414"] #will *never* connect to peers in deny list #peers_deny = ["192.168.0.3:3414", "192.168.0.4:3414"] #a list of preferred peers to connect to #peers_preferred = ["192.168.0.1:3414","192.168.0.2:3414"] #how long a banned peer should stay banned #ban_window = 10800 #maximum number of peers #peer_max_count = 25 #preferred minimum number of peers (we'll actively keep trying to add peers #until we get to at least this number #peer_min_preferred_count = 8 # 15 = Bit flags for FULL_NODE #This structure needs to be changed internally, to make it more configurable # A preferred dandelion_peer, mainly used for testing dandelion # dandelion_peer = "10.0.0.1:13144" [server.p2p_config.capabilities] bits = 15 ######################################### ### MEMPOOL CONFIGURATION ### ######################################### [server.pool_config] #base fee that's accepted into the pool accept_fee_base = 1000000 #maximum number of transactions allowed in the pool max_pool_size = 50000 #maximum number of transactions allowed in the stempool max_stempool_size = 50000 #maximum total weight of transactions that can get selected to build a block mineable_max_weight = 40000 ######################################### ### DANDELION CONFIGURATION ### ######################################### [server.dandelion_config] #dandelion relay time (choose new relay peer every n secs) relay_secs = 600 #fluff and broadcast after embargo expires if tx not seen on network embargo_secs = 180 #run dandelion stem/fluff processing every n secs (stem tx aggregation in this window) patience_secs = 10 #dandelion stem probability (stem 90% of the time, fluff 10% of the time) stem_probability = 90 ################################################ ### STRATUM MINING SERVER CONFIGURATION ### ################################################ [server.stratum_mining_config] #whether stratum server is enabled enable_stratum_server = true #what port and address for the stratum server to listen on stratum_server_addr = "127.0.0.1:3416" #the amount of time, in seconds, to attempt to mine on a particular #header before stopping and re-collecting transactions from the pool attempt_time_per_block = 15 #the minimum acceptable share difficulty to request from miners minimum_share_difficulty = 1 #the wallet receiver to which coinbase rewards will be sent wallet_listener_url = "http://127.0.0.1:3415" #whether to ignore the reward (mostly for testing) burn_reward = false ######################################### ### LOGGING CONFIGURATION ### ######################################### [logging] #whether to log to stdout log_to_stdout = true #log level for stdout: Error, Warning, Info, Debug, Trace stdout_log_level = "Warning" #whether to log to a file log_to_file = true #log level for file: Error, Warning, Info, Debug, Trace file_log_level = "Info" #log file path log_file_path = "/home/asus/.grin/main/grin-server.log" #whether to append to the log file (true), or replace it on every run (false) log_file_append = true #maximum log file size in bytes before performing log rotation #comment it to disable log rotation log_max_size = 16777216 ``` ---
**Author:** ![papampi](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.grin.mw/papampi/32/1695_2.png) [@papampi](https://forum.grin.mw/u/papampi)\ **Post date:** [February 21, 2019, 6:53am UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/4 "2019-02-21T06:53:46Z")
Change the log\_level to “Trace” and see what more info you get. I had to use a VPN to get grin connected to peers. ---
**Author:** ![colin](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@colin](https://forum.grin.mw/u/colin)\ **Post date:** [February 22, 2019, 7:27pm UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/5 "2019-02-22T19:27:37Z")
Thanks. Seems to be working now. I had to download the chain\_data folder from another computer that was working and replace the chain\_data folder on the computer that wasn’t working. Now it seems to be staying in sync. Maybe once a node gets too far behind it can’t catch up? ---
**Author:** ![MimbleWimble\_grin](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.grin.mw/mimblewimble_grin/32/2381_2.png) [@MimbleWimble\_grin](https://forum.grin.mw/u/MimbleWimble_grin)\ **Post date:** [November 1, 2019, 4:11pm UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/7 "2019-11-01T16:11:11Z")
这个看不懂啊… ---
**Author:** ![tomakomay](https://avatars.discourse-cdn.com/v4/letter/t/ea666f/32.png) [@tomakomay](https://forum.grin.mw/u/tomakomay)\ **Post date:** [November 20, 2019, 12:34pm UTC](https://forum.grin.mw/t/grin-1-0-1-connected-peers-0/4147/8 "2019-11-20T12:34:36Z")
Unfortunally, i`m have same problem. ![%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%D1%8D%D0%BA%D1%80%D0%B0%D0%BD%D0%B0%20%D0%BE%D1%82%202019-11-20%2022-26-29](https://canada1.discourse-cdn.com/flex036/uploads/grin/original/2X/6/6cd39e8e3325ac0320ec1b4846233904bd9aadac.png) Installed using [this manual](https://blog.goodaudience.com/getting-started-with-grin-on-launch-115005a2bb9) Can somebody help me fix this problem? [Server Configuration File](https://docs.google.com/document/d/1UkCJCqQCghy71q_zwMTAYLFZ_QTo8uAsMe5d_Ggi8n8/edit?usp=sharing)