# Funding Proposal: PIBD implementation in Grin++

**URL:** <https://forum.grin.mw/t/funding-proposal-pibd-implementation-in-grin/11583>\
**Category:** Governance\
**Created:** [January 28, 2025, 3:27pm UTC](https://forum.grin.mw/t/funding-proposal-pibd-implementation-in-grin/11583 "2025-01-28T15:27:07Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![trab](https://avatars.discourse-cdn.com/v4/letter/t/f04885/32.png) [@trab](https://forum.grin.mw/u/trab)\
**Post date:** [February 3, 2025, 4:36pm UTC](https://forum.grin.mw/t/funding-proposal-pibd-implementation-in-grin/11583/9 "2025-02-03T16:36:00Z")

</div>

> [@Trinitron](#):
>
> I don’t think it would turn away or attract any users

I think it would stop things like this from happening (correct me if I’m wrong @Anynomous I’m not sure if PIBD would solve the below issue exactly)

> [@Synchronizations were hard works](https://forum.grin.mw/t/synchronizations-were-hard-works/11553/2):
>
> Didn’t use the nodes for more than a weeks. Today start wm/grin, stuck at 2/7:99%. So I start grin++. It Sync ¼ succeed. But it reSyn tx states from 0%, after about a hour, it reach to 99% and enter step 3/7. A few seconds later return to 2/7 with 0%. Griners, have any suggestion. Do I have to delete all the data everytime?

I regularly see forum posts about not being able to complete a sync or it taking super long. Which is odd to newcomers because Grin is supposed to be minimal and light.

---

_[View the full topic](https://forum.grin.mw/t/funding-proposal-pibd-implementation-in-grin/11583)._